24
Function Keys
Side Keys
The Rotary knob and Side key programming are paired:
When the Rotary knob is programmed to Volume Control or
Dual Control, the Side keys support the one-touch feature
that allows you to select or activate commonly used features
by pressing and holding a single key. By default, the upper
side key is set to “Backlight On/Off” and the lower side key is
set to “Screen Saver On”. The following table lists the
programmable features and their availability in specific
MTP850 Ex/MTP810 Ex states/modes. For detailed
information on the features, please check with your Service
Provider.
For information on the function assigned to each Side or
Numeric key, please refer to your Service Provider.
The required time you need to press the Side or Numeric keys to
activate a one-touch function is set as default to 1 second. This
time may be set, however, by your Service Provider.
Rotary Knob Programming Side Key Programming
Dual Control Programmed to a one-touch
function
List Control
: Volume Up
: Volume Down
Volume Control Programmed to a one-touch
function
Feature Description
Talkgroup Switch Switch to a specific talkgroup
Talkgroup Scan Toggles on/off the Talkgroup Scan
function (TMO only)
Home Revert Puts the MTP850 Ex/MTP810 Ex back
Home display.
DMO/TMO Toggles between DMO and TMO
To Next Page
Loading...
