149
• Sts Failed – the screen returns within a few seconds to
the previous display.
Call-Out
This feature allows the user to receive call-out alerts. When
the Call-Out messages has been received by the radio, it
interrupts current services and attends to the call-out alert
without any further delay. After call-out alert has been
cleared, the radio exits Call-Out mode and reverts back to
normal mode. User is able only to receive Emergency Calls
during Call-Out mode. There are four types of the Call-Out
alert:
• Normal call-out
• Storm plan - it is sent to a group several time to raise
reliability. User can only accept the Call-Out by pressing
any button and is moved to information phase (soft keys
are not labelled).
• Fallback Mode - it includes only voice communication. It
can be cleared manually
• Test Call-Out - dispatcher has the ability to test this
feature. Radio is generating the tone with “Call-Out Test”
on the display. Only one softkey is enabled “Test OK” to
confirm and to clear the test.
Wait for the delivery report before sending a new status.
If you enter the status menu from a busy talkgroup, audio is
momentarily suspended to allow transmission of your status
message.
If an Emergency call is received, the MTP850 Ex/MTP810 Ex
immediately joins the Emergency call.
It is not possible to send a status message to a private number
that is not in the Contacts List.
Fallback is only possible when Radio is in Local Site Trunking.
To Next Page
Loading...
