146
Calling a Number in a Message
You can return a voice call to the sender of a
message or to any number that is embedded
in the message text. Your Service Provider
should configure this feature.
1. In the inbox list,
highlight a message.
OR
read a message containing number(s).
2. Press PTT or .
3. The display lists the numbers (including the sender’s
number).
4. To call, scroll to your selection and press PTT or .
5. Press CType
to select the type of call (Private, Phone, or
PABX). Then press PTT or .
If necessary, save the entries in the contact list.
User Defined Templates
The user defined mail templates are received,
new, sent or programmed messages that are
stored in the templates list and may be used
for sending messages.
1. From the main menu, select Messages
> Templates. The first template in the tem-
plate list is displayed.
2. In the templates list, scroll to the template you want to use.
Press
and select one of the following options:
• View to view the message in the template
If configured by your Service Provider it is not possible to call
back to a number that is not in the Contacts List.
It is possible that the templates numbers are not consecutive.
num 6743 or
Call me at 15.00
Reply Back
Message 1
6677
2) Template 2
1) Template 1
Select Back
Templates
3) Template 3
To Next Page
Loading...
