63
tone (if configured) before talking, and release the PTT when
listening.
3.
The call ends after a pre-programmed time, or if you
press .
Receiving a DMO Private Call
When a DMO Private Call is received, the call
is started immediately without need to accept
it by the called party.
1.
Press PTT to talk back and start talking.
2.
The call ends after a pre-programmed time,
or if you press .
Dialing on receiving a call
If you dial and a call is incoming, MTP850 Ex/MTP810 Ex
display remains unchanged while you hear the call. Dialing
continues on current display.
There is no presence check for Private Calls in DMO. This
means you don’t know whether the called party is available
when you start the call.
If the called party presses the DMO private call is suspended
for a specified time and in case the calling party is still
transmitting the call is joined again.
When an Emergency Call is received, then dialing is aborted
and Emgcy In Use display appears.
To Next Page
Loading...
