76
Exiting the Silent Emergency Mode
To exit the Silent Emergency mode:
• user initiates it by pressing Menu and then # key within 3
seconds.
• the Silent Emergency alarm is not successful or it is
rejected
• ambience listening terminates.
Silent Emergency Mode interactions
User presses the Emergency button while in Silent
Emergency
• terminal sends silent emergency alarm.
• terminal provides no audible/visible indication.
Silent Emergency and TMO/DMO Mode
As the Silent Emergency is only available in TMO, terminal
will change the mode from DMO to TMO. When the user is in
a private or group call, Silent Emergency waits until any of
the calls is ended to change the mode and enter the Silent
Emergency Mode.
Count of the efforts and duration that your terminal waits for the
reply of the alarm are set by the Service Provider. This can be
only interuppted when the user exits the Silent Emergency
mode.
In Silent Emergency Mode when the battery is removed the
terminal will turn on again in the normal mode.
If the Silent Emergency mode enters after the call the only
change on the display is the Private/Group notice which
disappears.
To Next Page
Loading...
