• Press the Menu Select button directly below Sel
to add and/or change the priority of the currently
displayed channel in the scan list.
• Press the Menu Select button directly below Del
to delete the currently displayed channel from the
scan list.
• Press the Menu Select button directly below Rcl
to view the next member of the scan list.
4 Perform one of the following actions to select
another channel that needs to be added or deleted
then repeat step 3. Otherwise, proceed to the next
step.
• or to the desired channel.
• Use the keypad to enter the desired channel
name.
• Use the 16-Position Select knob to select the
channel.
5 Perform one of the following actions:
• Move the Scan List Programming switch out of
programming position.
• Press to exit scan list programming and return
to the Home screen.
See Viewing and Changing the Priority Status on page 103
for more information on how to add and/or change the
priority of the currently displayed channel in the scan list.
Changing the Scan List Status
1 Perform one of the following actions:
• Long press the preprogrammed Scan List
Programming button (side button).
• Move the preprogrammed Scan List
Programming switch to programming position.
The display shows the programming mode icon and
the first list member.
2 or to the member you want to edit.
3 Perform one of the following actions:
• Press the Select button once to add the currently
displayed channel to the scan list.
English
102
To Next Page
Loading...
