• or to Save as Dest. and press the Menu
Select button directly below Sel and proceed to
step 5.
A blinking cursor appears on the screen.
3 Use the keypad to edit the auto-generated waypoint,
if required, or press the Menu Select button directly
below Cncl to return to the Location main screen.
4
Press the Menu Select button directly below Ok
once you are done.
One of the following scenarios occur:
• The display shows Current loc saved as
<Waypoint name>.
• The display shows Current loc saved as
[Home].
• The display shows Current loc saved as
[Destination].
5
To return to the Home screen, press , the PTT
button, the preprogrammed GPS button or the Menu
Select button directly below Exit.
Viewing a Saved Waypoint
Ensure your radio shows the current location on the
screen.
1
Press the Menu Select button directly below Optn.
2
or to Waypoints and press the Menu Select
button directly below Sel.
The display shows a list of waypoints.
3 Perform one of the following actions:
• or to scroll through the list.
• or to select a waypoint to view the location
information in full.
4
Press the Menu Select button directly below Optn.
5 To view the MGRS or latitude/longitude location,
time and date of the selected waypoint,
or to
View and press the Menu Select button directly
below Sel.
6 To return to the previous screen, press the Menu
Select button directly below Back, or to return to the
English
158
To Next Page
Loading...
Need help?
General
