• <Device Friendly Name> connect failed (if
the connection fails).
The display returns to Available Dev screen.
Turning On the Bluetooth Audio
Do one of the following to turn on the Bluetooth audio. You
can use the options interchangeably depending on your
preference and the programmed functions.
• Turning on the Bluetooth audio using the radio menu
BT:
a. or to BT. Press the Menu Select button
directly below BT to access the Bluetooth feature
screen.
b. or to Bluetooth spkr and press the Menu
Select button directly below On.
The display shows On.
c. To return to the Home screen, press the Menu
Select button directly below Exit.
• Turning on the Bluetooth audio using the
preprogrammed button:
a. To route the audio routing from the radio to the
headset, short press the preprogrammed button.
You hear a short, medium-pitched tone. The
display shows Headset on.
BT audio routing can be configured in CPS to route
the audio to RSM or radio's internal speaker. The
audio routes to the radio's speaker if RSM is not
connected. Check with your dealer or system
administrator for more information on the
programming of this feature.
NOTICE:
For BT PTT press, the active microphone can
be configured in CPS to transmit from either
the RSM, the radio microphone, or the BT
headset. If the configured device is not
available, audio transmission reverts to BT
headset.
English
180
To Next Page
Loading...
