Re-Pair Tim-
er Options
Re-Pair Timer Scenarios
riod of time depending upon the
Drop Timer value. If the device
fails to reconnect within the period,
the accessory then powers off.
Bluetooth Drop Timer
The Bluetooth Drop Timer has two different settings and
functions, depending upon the selection of the Re-Pair
Timer.
Re-Pair Timer
Options
Description
Immediate
(For MCW Ac-
cessories on-
ly)
0–15 minutes programmable buffer
time to re-establish the Bluetooth
Connection when the Bluetooth sig-
nal is out of range.
If either device powers off, the pair-
ing keys are immediately cleared
from both devices and the devices
must re-pair.
Re-Pair Timer
Options
Description
Infinite (For all
Bluetooth de-
vices)
This Timer only applies to the acces-
sory. The programmable timer
choices are: 0–15 minutes, 2 hours,
4 hours, or 8 hours.
Do note there are exceptions for Op-
eration Critical Wireless (OCW)
headset and PTT which are preprog-
rammed to 8 hours.
This timer is a "stay alive" timer
where the accessory remains on
without the device reconnecting be-
fore powering off. The radio remains
on until the user powers off the ra-
dio. The radio and accessory re-
mains paired indefinitely. Once the
device re-connect, the timer is reset.
The radio could not control the Drop Timer of Personal
Area Networking (PAN), Dial-Up Networking (DUN),
Commercial Off- The-Shelf (COTS), and data services. It
depends on the specifications of these external devices.
Check with your dealer or system administrator for more
information about these timers.
English
172
To Next Page
Loading...
Need help?
General
