NOTICE:
You can append a priority status and/or a
request reply to your message. See Priority
Status and Request Reply of a New Text
Message on page 128 for more information.
You can also select the Save to Drafts
option to save your message in the Drafts
folder to send it at a later time. See
Accessing the Drafts Folder on page 133 for
more information.
Sending a Quick Text Message
Quick Text messages are messages that are predefined
and usually consist of messages that are used most
frequently.
Each Quick Text message or Query has a maximum length
of 50 characters. You can select the required text from the
Quick Text or Query.
1 Perform one of the following actions:
• To access this feature using the preprogrammed
button, press the preprogrammed Quick Text
button and proceed to step 4.
• To access this feature using the menu, proceed
to the next step.
2
or to TMS and press the Menu Select button
directly below TMS to access the TMS feature
screen.
3 Perform one of the following actions:
• or to Compose and press the Menu Select
button directly below Sel .
• Press the Menu Select button directly below
Exit to return to the Home screen.
4
or to Quick Text and press the Menu Select
button directly below Sel for a predefined message.
5 or to scroll through the list of messages and
press the Menu Select button directly below Sel to
select the required message.
The message appears on the Compose screen, with
a blinking cursor at the end of it. Use the keypad to
edit the message, if required.
6
Press the Menu Select button directly below Optn .
English
127
To Next Page
Loading...
