depending on your preference and the programmed
functions.
• Clearing all Bluetooth devices information using the
preprogrammed Bluetooth On/Off button:
a. Long press the preprogrammed Bluetooth
On/Off button.
You hear a short, medium-pitched tone. The
display shows Please wait to indicate clearing
is in progress.
If successful, the display shows All BT devices
cleared.
If unsuccessful, the radio sounds a short, low-
pitched tone. The display shows Clear all BT
devices failed. The display returns to
Bluetooth feature screen.
• Clearing all Bluetooth devices information using the
radio menu Clr:
a.
or to Devices and press the Menu Select
button directly below Clr.
You hear a short, medium-pitched tone. The
display shows Clear all BT devices?.
b. Press the
Menu Select button directly below Yes
to proceed.
The display shows Please wait to indicate
clearing is in progress.
If successful, the display shows All BT devices
cleared.
If unsuccessful, you hear the radio sounds a
short, low-pitched tone. The display shows Clear
all BT devices failed. The display returns to
Bluetooth feature screen.
NOTICE:
If Re-Pair Timer is set to infinite and you clear keys
on the radio, you must clear keys on all previously
paired devices as well. (Please see your
accessories manual for further details.)
Editing the Bluetooth Friendly Name
Your radio must be preprogrammed to allow you to use this
feature.
1
or to BT. Press the Menu Select button directly
below BT to access the Bluetooth feature screen.
English
183
To Next Page
Loading...
