5
Press the Menu Select button directly below Clon to
begin cloning.
The radio displays Enter password if the protected
target zone is selected.
6 Enter the password and press the Menu Select
button directly below Ok to start cloning.
The radio displays Cloning…<Current cloning zone>.
One of the following scenarios occurs:
• If the cloning is successful, a tone sounds, the radio
displays Clone successful and the source zone alias
is displayed on the right.
• If the cloning is not successful, a tone sounds and the
radio displays Clone failed. Press the Back button to
enter the source zone list.
• If you press the Home button, the radio aborts cloning.
NOTICE:
The target radio enters programming mode during
cloning and resets after cloning is completed.
Contacts
This feature provides “address-book” capabilities on your
radio. Each entry corresponds to an alias (name) or ID
(number) that you use to initiate a call.
Contact entries are alphabetically sorted according to entry
alias. Each alias can have up to five IDs of different call
types associated with it.
Additionally, each entry, depending on context
(conventional, trunking, or phone), associates with one or
more of the four types of calls: Phone Call, Selective Call,
Private Call, or Call Alert.
Each entry within Contacts contains the following
information:
• Call Alias (Name)
• Call ID (Number)
• Call Type (Icon)
• WACN ID (Astro 25 Trunking IDs only)
• System ID
NOTICE:
Your radio must be preprogrammed to allow you to
add, edit, or delete the contact entries.
English
94
To Next Page
Loading...
