Erasing the Selected Encryption Keys
This feature allows you to erase all or selected encryption
keys.
Do one of the following to erase the selected encryption
keys. You can use the options interchangeably depending
on your preference and the programmed functions.
• Erasing the selected encryption keys using the radio
menu:
a. or to Eras and press the Menu Select button
directly below Eras.
The display shows the last user-selected and
stored encryption key, and the available menu
selections.
b. or to the desired encryption key or use the
keypad to enter the number of the desired key.
c. Press the Menu Select button directly below
Optn .
The display shows the available key erase
options.
d.
or to the required option and press the
Menu Select button directly below Sel .
e. Select
Erase all keys? or Erase single
key? by pressing the Menu Select button below
Yes to erase the encryption key(s) in the radio.
You can return to the previous screen by
pressing the Menu Select button below No.
• Erasing the single key in radios with the single-key
option and erasing all keys in radios with the
multikey option by using the preprogrammed Top
Side (Select) button and Top (Orange) button:
a. Press and hold the Top Side (Select) button.
b. While holding Top Side (Select) button down,
press the Top (Orange) button.
The display shows Please wait. When all the
encryption keys have been erased, the display
shows All keys erased.
NOTICE:
Do not press the Top (Orange) button
before pressing the Top Side (Select)
button, unless you are in an emergency
situation as this sends an emergency
alarm.
English
146
To Next Page
Loading...
