4
or to Delete All and press the Menu Select
button directly below Sel .
The display shows Delete All saved waypnts
Confirm?.
5
Press the Menu Select button directly below Yes to
delete all waypoints or press the Menu Select button
directly below No to return to the Waypoints main
screen.
The display shows All saved waypnts deleted.
Measuring the Distance and Bearing
from a Saved Waypoint
Ensure your radio shows the current location on the
screen.
1
Press the Menu Select button directly below Optn.
2
or to Dist frm here and press the Menu
Select button directly below Sel .
The display shows a list of waypoints.
3 or to the required waypoint and press the
Menu Select button directly below Sel .
The display shows the distance and bearing from the
current to the selected coordinates.
Location Feature in Emergency Mode
When the Emergency feature is activated by pressing the
emergency button, the radio exits the Location menu and
returns to the Home (default) screen so that you can see
which channel the emergency signal is going out on.
However, you may re-enter the Location menu while still in
emergency mode, provided that Silent Emergency has not
been activated.
If you have turned Location off using the ON/OFF menu
key, it automatically turns back on when Emergency is
activated.
If there is a solid location signal during Emergency, the
current location and the location information received is
saved as Emergency and Last Known Location waypoints,
respectively.
English
162
To Next Page
Loading...
Need help?
General
