6 - 10 Symbol DS3578 Digital Scanner Product Reference Guide
Convert Wedge Data
When enabled, the scanner converts all bar code data to the selected case.
Convert Wedge Data to Upper Case
Convert Wedge Data to Lower Case
*Do Not Convert Wedge Data
Function Key Mapping
ASCII values under 32 are normally sent as control key sequences (see Table 6-2 on page 6-14). Enable this
parameter to send the keys in bold in place of the standard key mapping. Table entries that do not have a bold
entry remain the same regardless of this parameter.
Enable Function Key Mapping
*Disable Function Key Mapping
To Next Page
Loading...
