User Preferences 5 - 15
Scan Data Transmission Format
To change the Scan Data Transmission Format:
1. Scan the Scan Options bar code.
2. Select one of four options:
• Data As Is
• <DATA> <SUFFIX>
• <PREFIX> <DATA>
• <PREFIX> <DATA> <SUFFIX>
3. Scan the Enter bar code on page 5-16.
To correct a mistake, scan the Data Format Cancel bar code on page 5-16.
To program a carriage return/enter after each bar code scanned, scan the following bar codes in order:
1. <SCAN OPTIONS>
2. <DATA> <SUFFIX>
3. Enter (on page 5-16).
.
Scan Options
*Data As Is
<DATA> <SUFFIX>
To Next Page
Loading...
