About This Guide
Introduction
The Symbol DS3578 Product Reference Guide provides general instructions for setting up, operating, maintaining,
and troubleshooting the scanner.
Chapter Descriptions
Topics covered in this guide are as follows:
•
Chapter 1, Getting Started provides a product overview and unpacking instructions.
•
Chapter 2, Scanning describes parts of the scanner, beeper and LED definitions, and how to use the
scanner.
•
Chapter 3, Maintenance and Technical Specifications provides information on how to care for the scanner,
troubleshooting, and technical specifications.
•
Chapter 4, Radio Communications provides information about the modes of operation and features available
for wireless communication between scanners, cradles and hosts, and also includes the parameters
necessary to configure the scanner.
•
Chapter 5, User Preferences describes each user preference feature and provides the programming bar
codes for selecting these features for the scanner. It also includes commonly used bar codes to customize
how data is transmitted to the host device.
•
Chapter 6, Keyboard Wedge Interface provides information for setting up the scanner for keyboard wedge
operation.
•
Chapter 7, RS-232 Interface provides information for setting up the scanner for RS-232 operation.
•
Chapter 8, USB Interface provides information for setting up the scanner for USB operation.
•
Chapter 9, IBM 468X/469X Interface provides information for setting up the scanner with IBM 468X/469X
POS systems.
•
Chapter 10, Symbologies describes all symbology features and provides the programming bar codes for
selecting these features.
•
Chapter 11, 123Scan2 provides information on the PC-based scanner configuration tool 123Scan
2
.
To Next Page
Loading...
