RS-232 Interface 7 - 19
Nixdorf Mode A/B and OPOS/JPOS Beep/LED Options
When Nixdorf Mode A, Nixdorf Mode B, or OPOS/JPOS is selected, this parameter indicates when the scanner
should beep and turn on its LED after a decode.
*Normal Operation
(Beep/LED Immediately After Decode)
Beep/LED After Transmission
Beep/LED After CTS Pulse
NOTE The Beep/LED After CTS Pulse option is not valid when Nixdorf Mode A is selected.
To Next Page
Loading...
