5 - 8 Symbol DS3578 Digital Scanner Product Reference Guide
Pager Motor Actuation After Good Decode
When enabled, the digital scanner pager motor activates (vibrates) after a good decode. Scan one of the following
bar codes to enable or disable this feature.
Beep on Insertion
When a scanner is inserted into a cradle and detects power, it emits a short low beep by default. To enable or
disable beeping on insertion, scan the appropriate bar code below.
*Actuate Pager Motor After Good Decode
(Enable)
Do Not Actuate Pager Motor After Good Decode
(Disable)
*Enable Beep on Insertion
Disable Beep on Insertion
To Next Page
Loading...
