12 - 30 Symbol DS3578 Digital Scanner Product Reference Guide
Setup Field(s)
Send Data (continued)
Send Next 19 Characters
Send Next 20 Characters
Table 12-2
Setup Field(s) Definitions
Parameter Description Page
Move Cursor
Move Cursor To a Character
Scan the
Move Cursor To Character
, then any printable ASCII
character from the
Alphanumeric Keyboard on page 12-93
. This
moves the cursor to the position after the matching character. If the
character is not there, the rule fails and ADF tries the next rule.
12-31
Move Cursor to Start of Data
Scan this bar code to move the cursor to the beginning of the data.
12-31
Move Cursor Past a Character
This parameter moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is ‘A’, the
cursor moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan the
Move Cursor Past
Character
, then select a character from the
Alphanumeric Keyboard
.
If the character is not there, the cursor does not move (i.e., has no
effect).
12-32
Move Cursor Past a Specific
String
This action moves the cursor past the first occurrence of a selected
string. Scan
Move Cursor Past Specific String
, then select the
character(s) (up to 10) using the
Alphanumeric Keyboard
. Scan the
End of Message bar code on page 12-102
.
12-32
Move Cursor to Specific
String and Replace
This action moves the cursor to the first occurrence of a selected
string and replaces the string with another user-defined string. Scan
Move Cursor to Specific String and Replace
, then enter an
alphanumeric string representing the character(s) (up to 10) to match
and delete using the
Alphanumeric Keyboard
. Scan the
End of
Message bar code on page 12-102
. Enter another alphanumeric
string representing the character(s) (up to 10) to insert using the
Alphanumeric Keyboard
. Scan
End of Message
.
12-32
To Next Page
Loading...
