3 - 6 Symbol DS3578 Digital Scanner Product Reference Guide
DPM Marks
(DPM unit only)
Datamatrix marks applied by dot -peening. All supported barcode
types listed above marked by laser etching, chemical etching, ink
marking, molding, stamping or casting methods on surfaces such
as including metal, plastic, rubber or glass
2D TLC-39, Aztec (Standard, Inverse), MaxiCode, DataMatrix/ECC
200 (Standard, Inverse), QR Code (Standard, Inverse, Micro)
IUID Support Supports IUID parsing. The ability to read and separate IUID
fields per application requirements
Typical Working Distance See
Decode Ranges on page 2-7
Print Contrast Minimum 25% minimum reflectance differential, measured at 650 nm.
Motion Tolerances Horizontal Velocity: 5 in. (12.7 cm) per second
Interfaces Supported Keyboard Wedge, RS-232, USB, IBM 468X/469X, Synapse,
123Scan
2
User Environment
Operating Temperature -4° to 122° F (-20° to 50° C)
Storage Temperature -40° to 158° F (-40° to 70° C)
Charging Temperature 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C)
ideal
Humidity 5% to 95% (non-condensing)
Ambient Light Immunity
Indoor:
Outdoor:
450 Ft Candles (4,842 Lux)
8,000 Ft Candles (86,080 Lux)
Durability 6.5 ft (2.0 m) drops to concrete;
5 ft (1.5 m) at -4° F (-20° C)
Regulatory
RoHS Compliance with RoHS Directive 2002/95/EEC
Electrical Safety Certified Pending to UL1950, CSA C22.2 No.950.
EN60950/IC950
Laser Classifications IEC 825-1 Class 2
EMI FCC Part 15 Class B, ICES-003 Class B European Union EMC
Directive, Australian SMA, Taiwan EMC, Japan
VCCI/MITI/Dentori
Input Transient Protection IEC 1000-4-(2,3,4,5,6,11)
Table 3-2
Technical Specifications - Scanner (Continued)
Item Description
To Next Page
Loading...
