Synapse Interface 9-3
Introduction
Synapse Smart cables interface to a variety of hosts. The appropriate Synapse Smart cable has built-in intelligence to detect the host
to which it is connected. An external power supply is required.
Figure 9-1. Synapse Connection Without Peripherals - Power Supplied Externally via Y-Cable
Interface cables vary depending on configuration. The connectors may be different from the examples
illustrated, but the steps to connect the scanner are the same. See Chapter 1, Getting Started for connection
information.
Host
Host Port
Synapse Smart Cable
To EAS (optional)
Power Port
To Next Page
Loading...
