Symbologies 13-47
Set Lengths for Code 39 (continued)
Length Within Range - This option allows decoding of a Code 39 symbol with a specific length range. The length range
is selected from numeric bar codes beginning on page D-1 in Appendix D, Numeric Bar Codes. For example, to decode Code 39
symbols containing between 4 and 12 characters, first scan Code 39 - Length Within Range. Then scan 0, 4, 1, and 2 (single digit
numbers must always be preceded by a leading zero). If an error occurs, or to change the selection, scan Cancel on page D-8.
Code 39 - Length Within Range
Any Length - Scanning this option allows decoding of Code 39 symbols containing any number of characters within the scanner
capability.
Code 39 - Any Length
To Next Page
Loading...
Need help?
General
