Synapse Interface 9-5
Connecting a Synapse Interface Cable
Figure 9-3. Synapse Cable Connection
The Synapse interface consists of two components:
• The Synapse adapter cable, which connects to the scanner’s host port on one end, and to the Synapse Smart cable on the
other
• The Synapse Smart cable, which connects to the host computer on one end, and the Synapse adapter cable on the other.
The Synapse Smart cable detects the host type and programs itself accordingly.
To connect the Synapse interface:
1. Plug the Synapse adapter cable (p/n 25-32463-xx) into the host port of the scanner, as described in Connecting the Host and
Peripheral Cables on page 1-6.
2. Align the ‘S’ on the Synapse adapter cable with the ‘S’ on the Synapse Smart cable and plug the cable in.
3. Connect the other end of the Synapse Smart cable to the host.
See the Synapse Interface Guide provided with the Synapse cable for detailed setup instructions.
Synapse adapter cable
To scanner
Synapse Smart Cable
To host
Note
To Next Page
Loading...
