Symbol LSSymbol LS7708 Product Reference Guide4-4
Table 4-1. User Preferences Default Table
Parameter Default Page Number
User Preferences
Set Default Parameter All Defaults 4-5
Beeper Tone Medium 4-5
Beeper Volume High 4-7
Beep After Good Decode Enable 4-9
Low Power Mode Low Power Blink Mode 4-10
Scan Pattern Mode Rastering 4-11
Time-out Between Same Symbol 0.6 sec 4-12
Time-out Between Different Symbols 0.2 sec 4-12
Time Delay to Low Power Mode 30 Minutes 4-13
Linear UPC/EAN Decode Disable 4-15
UPC Half Block Stitching Enable 4-16
EAS Interlock Disable 4-17
To Next Page
Loading...
