Movincool CM 25 - Page 58

Repair Section
58
(2) Exiting the self-diagnostic code records display
• To exit the self-diagnostic code records display, press the "RESET" button, or do not operate the
system for 1 minute.
< NOTE >
If there are no self-diagnostic codes, “-- --” will be displayed.
Display No. Display code Function
- Ot Total unit power on time (unit: h)
- Ct Compressor operating time (unit: h)
1 Self-diagnostic code display Self-diagnostic code record 1
2 Self-diagnostic code display Self-diagnostic code record 2
3 Self-diagnostic code display Self-diagnostic code record 3
4 Self-diagnostic code display Self-diagnostic code record 4