Movincool CM 25 - Technical Specifications

Operation Section
8
2.2 Technical Specifications
Electronic Features
Operation
Wall Mounted Controller (WMC) with LCD
display
Control Electronic with Inverter Circuit
Electronic Characteristics
Voltage Requirement Single-Phase 208/230 V 60 Hz
Min.- Max. Voltage Min. 198 V, Max. 253 V
Recommended Fuse Size 20 A
Cooling Capacity and Power Consumption
Evaporator: 80°F (27°C), 50% RH/
Condenser: 95°F (35°C), 50% RH
Total Cooling Capacity
*1
25000/25000 Btu/h (7320/7320 W)
Sensible Cooling Capacity
*1
18000/18000 Btu/h (5280/5280 W)
Power Consumption
*1
2.90/2.90 kW
Current Consumption
*1
13.6/12.6 A
Power Factor 98/99%
Evaporator: 72°F (22°C), 50% RH/
Condenser: 95°F (35°C), 50% RH
Total Cooling Capacity
*1
25000/25000 Btu/h (7320/7320 W)
Sensible Cooling Capacity
*1
18900/18900 Btu/h (5580/5580 W)
Power Consumption
*1
3.20/3.20 kW
Current Consumption
*1
15.0/15.0 A
Power Factor 98/98%
SEER
*1
14/14
Refrigerant Circuit
Compressor
Compression
Type
Hermetic Swing Inverter
Evaporator Plate Fin
Condenser Plate Fin
Refrigerant Control Electronic Expansion Valve
Evaporator
Type of Fan Centrifugal Fan
Air Flow
High 850/950 CFM (1445/1615 m
3
/h)
Low 700/800 CFM (1190/1360 m
3
/h)
Max. External Static Pressure 0.6 IWG (150 Pa)
Motor Output 0.21 kW
Condenser
Type of Fan Centrifugal Fan
Air Flow
High 1490/1600 CFM (2530/2720 m
3
/h)
Low 1190/1300 CFM (2020/2210 m
3
/h)
Max. External Static Pressure 0.5 IWG (125 Pa)
Motor Output 0.35 kW
Refrigerant
Type R-410A
Amount 2.31 lb (1.05 kg)