EDS-508A/505A Series User’s Manual Getting Started
2-8
NOTE
By default, the EDS’s password is not set (i.e., is blank).
You may need to wait a few moments for the web page to be downloaded to your computer. Use
the menu tree on the left side of the window to open the function pages to access each of Moxa
EtherDevice Switch’s functions.
Disabling Telnet and Browser Access
If you are connecting the EDS to a public network, but do not intend to use its management
functions over the network, we suggest disabling both Telnet Console and Web Configuration
from the RS-232 Console’s Basic Settings System Identification page, as shown in the
following figure.
To Next Page
Loading...
Need help?
General
