EDS-508A/505A Series User’s Manual Introduction
1-3
Package Checklist
The Moxa EtherDevice Switch EDS-508A/505A Series is shipped with the following items. If any
of these items are missing or damaged, please contact your customer service representative for
assistance.
1 Moxa EtherDevice Switch EDS-508A/505A
Hardware Installation Guide
CD-ROM with User’s Manual and Windows Utility
Moxa Product Warranty booklet
RJ45 to DB9 Console port cable
Protective caps for unused ports
Panel mounting kit (optional—must order separately)
Features
IPv6 Ready logo awarded (IPv6 Logo Committee certified).
IEEE 1588 PTP (Precision Time Protocol) for precise time synchronization of networks.
DHCP Option 82 for IP address assignment with different policies.
Modbus/TCP industrial Ethernet protocol supported.
Turbo Ring and Turbo Chain (recovery time < 20 ms at full load) and RSTP/STP (IEEE
802.1w/D).
IGMP snooping and GMRP for filtering multicast traffic.
Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning.
QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism.
Port Trunking for optimum bandwidth utilization.
IEEE 802.1X, HTTPS, and SSH to enhance network security.
SNMPv1/v2c/v3 for different levels of network management.
RMON for efficient network monitoring and proactive capability.
Bandwidth management prevents unpredictable network status.
Lock port function for blocking unauthorized access based on MAC address.
Port mirroring for online debugging.
Automatic warning by exception through e-mail, relay output.
Digital inputs to integrate sensors and alarms with IP networks.
To Next Page
Loading...
Need help?
General
