PT-7728 User’s Manual Featured Functions
3-18
SNMP V3
No-Auth No No
This uses an account with admin
or user to access objects
MD5 or SHA
Authentication
based on MD5
or SHA
No
This provides authentication based
on HMAC-MD5, or HMAC-SHA
algorithms. 8-character passwords
are the minimum requirement for
authentication.
MD5 or SHA
Authentication
based on MD5
or SHA
Data
encryption
key
This provides authentication based
on HMAC-MD5 or HMAC-SHA
algorithms, and data encryption
key. 8-character passwords and a
data encryption key are the
minimum requirements for
authentication .and encryption.
These parameters are configured on the SNMP page. A more detailed explanation of each
parameter is given below the figure.
SNMP Read/Write Settings
SNMP Versions
Setting Description Factory Default
V1, V2c, V3, or
V1, V2c, or
V3 only
This specifies the SNMP protocol version
used to manage the switch.
V1, V2c
To Next Page
Loading...
Need help?
General
