PT-7728 User’s Manual Getting Started
2-3
3. The Property window should open. On the Communication Parameter tab for Ports, select
the COM port that is being used for the console connection. Set the other fields as follows:
115200 for Baud Rate, 8 for Data Bits, None for Parity, and 1 for Stop Bits.
4. On the Terminal tab, select VT100 for Terminal Type. Click OK.
5. In the terminal window, the PT-7728 will prompt you to select a terminal type. Enter 1 to
select ansi/vt100 and press Enter.
To Next Page
Loading...
