MR MESSKO COMPACT - Page 35

6 Installation and commissioning
355831400/02 EN
2. Attach the pointer thermometer with vibration-damping plate to the trans-
former.
Figure13: Attaching the pointer thermometer with vibration-damping plate
6.3.1.2 Attaching the Compact RM pointer thermometer
You can use the following screws to attach the pointer thermometer:
▪ M12 hexagon screws or cylinder screws (as an alternative, also 7/16-14
UNC).
▪ Use a screw length that is appropriate based on the installation situation.