MR MSENSE DGA 2/3 - 4.3 Design;versions

4 Product description
Maschinenfabrik Reinhausen GmbH 202318 4001150/12 ENMSENSE
®
DGA 2/3
4.3 Design/versions
Figure1: MSENSE® DGA 2/3
DGA 2 Measurement components H
2
,
moisture in oil and oil tempera-
ture (for mineral oils)
DGA 3 Measurement components H
2
,
CO, moisture in oil and oil tem-
perature (for mineral oils)
1 Ventilation 2 Housing cover screw connection
3 Ball valve locking lever 4 Display (optional)
5 ENTER key 6 DOWN key
7 UP key 8 Supply voltage cable screw con-
nection
(3x M20 x 1.5 WADI or 3x ½“ NPT)
9 Signaling relay cable screw con-
nection
10 Analog outputs cable screw con-
nection
11 Interface (5-pole) for service PC
and Modbus RTU communication
12 Measuring pipe (285mm /
507mm)
13 Ball valve clamp connection 14 Mounting flange o-ring gasket:
DN50 PN6/PN16 and DN80 PN16
Mounting flange any gasket:
DN50 PN16 and DN80 PN16
15 Measuring head 16 Ball valve
17 Grounding screw 18 Safety chain
19 Fixing screw for safety chain 20 Connection for venting and taking
samples
21 Housing cover