MR MSENSE DGA 2/3 - 6 Mounting; 6.1 Installation recommendation

6 Mounting
Maschinenfabrik Reinhausen GmbH 2023 234001150/12 EN MSENSE
®
DGA 2/3
6 Mounting
This chapter describes how to correctly mount and connect the device.
DANGER
Electric shock!
Risk of fatal injury due to electrical voltage. Always observe the following
safety regulations when working in or on electrical equipment.
► Disconnect the equipment.
► Lock the equipment to prevent an unintentional restart.
► Make sure all poles are de-energized.
► Ground and short-circuit.
► Cover or cordon off adjacent energized parts.
NOTICE
Damage to the device!
Electrostatic discharge can lead to damage to the device.
► Take precautionary measures to prevent the build-up of electrostatic
charges on work surfaces and personnel.
6.1 Installation recommendation
Figure3: Installation recommendation
Recommended installation position
1 Side wall of the transformer, half way up
Alternative installation positions
2 Connection pipe from the cooling system to the transformer tank