MR MSENSE DGA 2/3 - 6.2.2 Mounting the MSENSE DGA 2;3

6 Mounting
Maschinenfabrik Reinhausen GmbH 2023 294001150/12 EN MSENSE
®
DGA 2/3
6.2.2 Mounting the MSENSE® DGA 2/3
1. Remove the device from the packaging and place it securely on a scratch-
resistant and non-slip level surface.
Figure12: Setting the device down securely
When doing so, ensure that the display of the device version with display is
not damaged.
2. Remove the adhesive strip from the protective cap and pull the protective
cap off of the device.
Figure13: Removing the protective cap