MR MSENSE DGA 2/3 - 4.4 Safety markings and nameplate

4 Product description
Maschinenfabrik Reinhausen GmbH 2023 194001150/12 EN MSENSE
®
DGA 2/3
Additional signal protocols
(with additional protocol converter)
DNP 3.0;
Modbus TCP;
IEC61850-8-1 MMS (optional)
Accessories (optional) Power supply unit for protocol con-
verter
Offshore version Offshore
4.4 Safety markings and nameplate
The following safety markings are used on the product:
Figure2: Safety markings and nameplate
Description
1 Warning sign "Do not close!" on the slide valve
2 Nameplate
3 Observe the documentation
4 Observe the documentation: See the note about the oil extraction
adapter in the chapter "Mounting the MSENSE® DGA 2/3" [►Section
6.2.2, Page 29]
5 Ground connection on the ball valve
Table4: Safety markings and nameplate