MR MSENSE DGA 2/3 - 10.4.2 Field calibration

10 Maintenance
Maschinenfabrik Reinhausen GmbH 202372 4001150/12 ENMSENSE
®
DGA 2/3
2. Take an oil sample in accordance with IEC60567 and send it to the
MESSKO® oil laboratory in suitable packaging. The sample analysis val-
ues will be used later for the field calibration.
Figure47: MESSKO® sample extraction kit for extracting and shipping oil samples
10.4.2 Field calibration
Once the sample has been analyzed in the oil laboratory, you will be sent
the oil sample report for the oil analysis. The following values are important:
▪ Hydrogen H2
▪ Carbon monoxide CO (MSENSE®DGA3 only)
▪ Moisture content H2O
▪ Date of the oil sample