MR MSENSE DGA 2/3 - Page 37

6 Mounting
Maschinenfabrik Reinhausen GmbH 2023 374001150/12 EN MSENSE
®
DGA 2/3
16. Reduce the length of the sagging safety chain by inserting the supplied
chain connector through two links in the chain and closing it.
Figure25: Locking the safety chain
Alternatively, a padlock can be used to secure the device against unautho-
rized removal.
Affixing the warning sign
► Attach the warning sign "Do not close!" to the shutter valve using the ca-
ble tie included.
Figure26: Warning sign