Declaration of Conformity
Control Unit Models 9010 LCD and 9020 LCD
3
GB
Declaration of Conformity
The manufacturer or his in the community established authorized representative
MSA AUER GmbH
Thiemannstraße 1
D-12059 Berlin
declares that the product:
CONTROL UNIT 9010 and 9020 LCD
based on the EC-Type Examination Certificate:
INERIS 00 ATEX 0028 X
Standards: EN 60079-29-1 :2007, EN 50104 :2010
EN 50271:2010, EN 50 402 :2009
EN 45544-1 :1999, EN 45544-2 :1999
complies with the ATEX directive 94/9/EC, Annex III. Quality Assurance Notification complying with
Annex IV of the ATEX Directive 94/9/EC has been issued by Ineris of France, Notified Body number:
0080
The product is in conformance with the directive 2004/108/EC, (EMC):
EN 50270 :2006 Type 2, EN 61000- 6- 4 :2007
The product is in conformance with the directive 2006/95/EC (LVD):
EN 61010-1 :2010
MSA AUER GmbH
Dr. Axel Schubert
R&D Instruments
Berlin, September 2013
To Next Page
Loading...
Need help?
General
