ALTAIR 5X PID
32
Operation
US
4.4 Measurement Mode (Normal Operation)
The following options pages can be executed from the Measurement screen:
* The display of these pages can be de-activated through MSA Link software
For further information see chapter 12.
BUMP page This page allows user to perform a Bump Test on installed sensors
Peak Page*This page shows the peak readings for all sensors.
Min Page This page shows the minimum readings for the oxygen sensor.
STEL Page*This page shows the calculated STEL readings of the device.
TWA Page* This page shows the calculated TWA readings of the device.
Date Page This page shows actual date settings of the device.
Last Cal Date This page shows the date of the last calibration.
Cal Due* This page shows the set date for the next calibration.
Change VOC
Gas?
This page allows the VOC gas type to be changed
Discoverable
Mode
This page allows the user to put the device into Bluetooth discoverable
mode in order to pair with another device.
Motion Alert This page allows the Motion Alert Feature to be activated or deactivated.
Wireless USB
This page allows the Wireless USB communication to be activated or
deactivated.
To Next Page
