MSA ALTAIR 5X PID - Changeable Feature Summary; Changeable Features Overview

ALTAIR 5X PID
90
Changeable Feature Summary
US
12 Changeable Feature Summary
Feature Initial Setting
Setup Path to Change this
Setting
Change
with MSA
link?
Change
via Blue-
tooth?
Setup Password 672 - Yes No
Vibrating Alarm ON ALARM OPTIONS Yes Yes
Horn Alarm ON ALARM OPTIONS Yes Yes
LED Alarm ON ALARM OPTIONS Yes Yes
Safe LED (green) ON - Yes No
Operating Beep (alarm LEDs &
horn)
OFF INSTRUMENT OPTIONS Yes No
Stealth OFF INSTRUMENT OPTIONS No No
MotionAlert - Access Allowed ALARM OPTIONS No Yes
MotionAlert OFF
Use T button from
MEASURE page
No Yes
Sensor Alarm Levels
ALARM OPTIONS /
SENSOR ALARM SETUP
Yes Yes
Enable / Disable High & Low Alarms Enabled - Yes Yes
Turn Sensors ON / OFF ON
INSTRUMENT OPTIONS /
SENSOR SETUP
Yes No
Show Peak ON - Yes No
Show STEL, TWA ON - Yes No
Cal Cylinder Setup CAL OPTIONS Yes Yes
Show Last Cal Date ON CAL OPTIONS No No
Show Cal Due ON CAL OPTIONS Yes No
Cal Password Required OFF CAL OPTIONS No No
Backlight Enabled - No Yes
Backlight Duration 10 s INSTRUMENT OPTIONS Yes Yes
Display Contrast Factory-set INSTRUMENT OPTIONS No No
Language User-set INSTRUMENT OPTIONS No Yes
Date, Time User-set INSTRUMENT OPTIONS Yes Yes
Datalog Interval 3 min INSTRUMENT OPTIONS Yes No
Custom Logo Screen Factory-set Certified service center Yes No
Device S/N Factory-set - No No
Company Name Blank - Yes Yes
Dept./User Name Blank - Yes Yes
VOC RF ON/OFF ON INSTRUMENT OPTIONS Yes No
Bump Due ON/OFF OFF - Yes Yes
Bump Interval 1 - Yes Yes
Cal Due Interval 30 INSTRUMENT OPTIONS Yes Yes