MSA LUNAR - Page 15

Tethering LUNARto an M1 SCBA
(1) Identify the M1 SCBAshoulder strap webbing
loop (09). It sits on the User’s right-hand side,
one loop above the strap adjustment.
(2) Slide the webbing loop (09) between the gap in
the Split D-ring (01) until half of the webbing is
within the Split D-ring and half of the webbing is
underneath it.
(3) Grip the Retractor (02) and pull forcefully to the
User’s right. Fold the webbing loop (09) under
the Split D-ring (01) until it is able to slide
between the gap and within the Split D-ring.
Note that the stitching on these loops is robust
and can handle the amount of force required.
MSA LUNAR 15
US 4 Basic Operation