To Next Page

To Previous Page

A-10

MS-6728 ATX Mainboard

You may regulate each volumn to the speaker for current playing digital

sound sources. If you use 2-channel speaker, only Front Left and Front Right

bars are available for you to configure. If you use 4-channel speaker, only

Front Left, Front Right, Rear Left and Rear Right bars are available. In 6-channel

mode, you may adjust all the speakers as showed above.

h Loudness (AGC): Loudness w/Auto-Gain-Control: When you want a higher

volume level of digital audio, you can enable Loudness (AGC). It provides

extra +3dB to +12dB gain to all channels. The driver has also been designed

with a sophisticated auto gain control minimizing the signal clipping

distortion. However, it is not recommended to

enhance the volume too much here if you want a

best sound quality. The best way is to increase the

volume of external speakers or just to increase the

Master Volume in Microsoft Volume Control.

Volumn Control

Click on the Volumn Control tab and the following screen appears.

Reset all to

default value

(0dB)

Left-click Microsoft “Volume

Control” icon once and you’ll

get the Master Volume control

slider.

Questions and Answers:

Need help?

Do you have a question about the MSI 865PE NEO2-LS - Motherboard - ATX and is the answer not in the manual?

MSI 865PE NEO2-LS - Motherboard - ATX Specifications

General