Appendix 51
8. After the file is received, terminal should display “Completed.” Then the boot menu
appears again.
MSI8000 SCALECORE2 BOOT LOADER Ver. 02-04 (c) 2011-09-02 16:06
(u) Download and program application code
(q) query app code info
(g) execute app code
(r) refresh
9. Optional step: send q to check the program. The ScaleCore will respond with a
message that details the 32b checksum, the product ID and version, and the
application code version number in the following form:
Computed Signature BOB742D
Received Signature BOB742D
Product ID 07 Dyna-Link product family
Product Version ID 00 Optional features code
App Code Version 01-04 Firmware version number
If the CRC Signature does not match, go back to step 4 and try again.
10.Send an “r” to restore the boot menu.
MSI8000 SCALECORE2 BOOT LOADER Ver. 00-05 (c) 2012-05-02 10:55
(u) Download and program application code
(your bootloader version may vary)
(q) query app code info
(g) execute app code
(r) refresh
11.Send a “g.” The MSI-7300 should start.
32b CRC must match
To Next Page
Loading...
