4 MSI-7300 Operator’s Manual
1.3 General Information
1. If the text is discussing a function key, the function key will be displayed as Fx-
YYYYY
with the programmed user key function in italics. F1 and F2 can both be
programmed to all available user functions.
2. If a function key does not work, it is probably because the Dyna-Link 2 is not
setup to support the key. For example, if the Function key is set for TOTAL, you
must also setup the TOTAL mode in the setup menu.
3. When in setup menus, the ZERO key drops back one menu level. At the root
menu level, the ZERO key stores the changes and returns to the tension mode.
4. When in setup menus, the POWER key returns you directly to the tension
display without storing the changes.
To Next Page
Loading...
