MSSC Smart-Jet One - Page 20

20
USER MANUAL V1.2 | Updated August 30, 2022
Print information
Index
Description
Value
1
Printer status
• STOPPED.
• PROCESSING (Normal status when printer
change from Stopped to Printing).
• PRINTING (Normal status when printing).
2
Current speed
• If an encoder is not used, the value shown will
be the number entered in Settings > System
Settings > Encoder > Internal > Speed
(m/min).
• If an encoder is used, the shown value will be
the speed measured by the encoder.
3
Number of pages of the
template that have been
printed
• Each printing job will increase the value by 1.
• Range: 0 to 1,000,000,0000
4
The total number of pages of the
template
• If the template contains a counter, the value will
equal the end counter value.
• If the template contains a database, the value
will equal the number of rows in the database
file.
• If the template contains a database and counter,
the value will equal the number of rows in the
database file, even if the counter value is bigger.
• If the template contains fixed text only, the value
will be 1. ENABLE Loop for unlimited printing.
5
Printhead information
• Printhead type.
• Status.
• Ink volume.
• Drop size.
• Etc.
6
Basic setting
• Delay before.
• Disable sensor.
• Fixed length.
• Adjust.
• Calibrate the Voltage and Pulse Width.
7
User login
Display user login to operate the printer
8
Current system clock
To change the value, select Settings >
Advanced settings > Date.