SAFETY INFORMATION
• Ensure the printer is set to STOP before installing or removing a cartridge.
• Avoid using printer with high voltage and/or non-compatible power supplies or external
electronic accessories.
• Ensure printer is installed and stored in a manner to prevent any strong impacts from any
external objects.
• Minimize the use and storage of the printer in high dust environments.
• The working temperature of the printer is 5
o
C – 45
o
C.
• Turn off printer before plugging or removing any cable (DATA / ENCODER / SENSOR / IO).
• Be careful when using other external devices such as ENCODER / SENSOR / ALARM BEACON /
POWER SUPPLY.
• Only use authorized cartridges provided by your authorized supplier.
• Ensure you follow all instructions while installing new firmware and software.
• Use mask and safety goggles to prevent exposure to any airborne inks.
• Use gloves to prevent any cuts while installing the printer with the mounting bracket as there
may be sharp edges.
• Do not expose to excessive heat sources, sunshine, fire or the like.
• For indoor use only, the printer should not be exposed to water.
• The power-outlet shall be installed near the equipment and be easily accessible.
• No replaceable parts inside, refer servicing to manufacturer specified agency or qualified
service personnel.
• Only use accessories specified by the manufacturer.
• Disposal: all electrical and electronic products including batteries should be disposed of
separately from the municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
• Please ensure the printer and your systems are properly grounded.
• Use only the power supply listed in the user instructions: power supply adaptor:
manufacturer: MEAN WELL ENTERPRISES CO., LTD., MODEL NO.: GST60A24
To Next Page
Loading...
