Checking strainer
Item Findings Action
Strainer Metallic residues •
Clean
•
Monitor engine operation
•
Check strainer daily
•
Contact Service.
Strainer Damaged Fit new part
Square-section ring Damaged Fit new part
O-ring Damaged Fit new part
Cleaning strainer
1. Wash strainer (5) with cleaner.
2. Remove stubborn deposits with soft brush.
3. Blow out strainer (5) with compressed air from inside.
Installing strainer
1. Coat square-section ring (4) on strainer (5) with engine oil and install strainer (5).
2. Coat O-ring (3) with engine oil and fit in filter housing.
3. Fit cover (2) and secure with screws (1) and washers.
M015695/03E 2013-03 | Task Description | 119
TIM-ID: 0000006402 - 004
To Next Page
Loading...
