MTU C13 - Engine Oil - Change

7.13.3 Engine oil – Change
Preconditions
☑Engine shut down and starting disabled.
☑Engine is at operating temperature.
☑MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Torque wrench, 40-200Nm
F30027337 1
Ratchet adapter
F30027341 1
Engine oil
Sealing ring
(→ Spare Parts Catalog)
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Procedure without pump: Draining oil at drain plug(s) on oil pan
1. Provide a suitable container in which to collect the engine oil.
2. Remove drain plug(s) and drain engine oil.
3. Install drain plug(s) with new sealing ring.
Procedure with pump: Extracting engine oil
1. Provide a suitable container in which to collect the engine oil.
2. Extract all oil from oil pan using the pump.
Draining residual oil from equip-
ment carrier (only with unsched-
uled engine oil change)
1. Provide a suitable container in which to col-
lect the engine oil.
2. Remove drain plug (1) and drain oil (ap-
prox. 7 liters) from oil heat exchanger and
oil filter.
3. Remove drain screws (2) and (3) and drain
engine oil:
• (2) approx. 12 liters
• (3) approx. 5 liters
4. Install drain screws(s) with new sealing
ring.
112 | Task Description | M015695/03E 2013-03
TIM-ID: 0000006152 - 008