7.16.4 Charge-air coolant – Filling
Preconditions
☑Engine shut down and starting disabled.
☑MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Charge-air coolant
WARNING
Coolant is hot and under pressure.
Risk of injury and scalding!
• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.
CAUTION
Cold coolant in hot engine can cause thermal stress.
Formation of cracks in components!
• Fill / top up coolant only into cold engine.
Preparatory steps
1. Turn breather valve of coolant expansion
tank counterclockwise until the first stop
and allow pressure to escape.
2. Continue to turn breather valve counter-
clockwise and remove.
M015695/03E 2013-03 | Task Description | 135
TIM-ID: 0000007012 - 006
To Next Page
Loading...
